About    Huamao
Contact  Huamao
Download Center
  当前位置:阅读信息
HM-10_11 firmware V545 released



                   HM-10/11 CC2540/1
V545
=======================================================================
Add AT+FFE2 command used to add a new Characteristic
Add AT+FFE2<P1> command used to add a new Characteristic.
P1: ?  ----- Query
P1: 0  ----- Close FFE2 Characteristic, Default value.
P1: 1  ----- Open FFE2 Characteristic
if AT+FFE20 is setup
Service and Characteristic list as follow:
  Service FFE0
  Characteristic FFE1 (if AT+RESP0 was setup, Properties is Read, WriteWithoutResponse, Notify)
  Characteristic FFE1 (if AT+RESP1 was setup, Properties is Read, Write, Notify)
if AT+FFE21 is setup
Service and Characteristic list as follow:
  Service FFE0
  Characteristic FFE1 (Properties is Read, Notify)
  Characteristic FFE2 (if AT+RESP0 was setup, Properties is WriteWithoutResponse)
  Characteristic FFE2 (if AT+RESP1 was setup, Properties is Write)
                                                HMSoft
                                                2016.12
技术支持: webmaster@jnhuamao.cn

About us  |  Contact us  |  Download Center
Mail: webmaster@jnhuamao.cn
Copyright 2007-2016 Jinan Huamao technology Co., LTD.